UUNA Tek iDraw 2.0 A4 WiKi Guide

UUNA Tek iDraw 2.0 A4

Complete Setup & Getting Started Guide

1. Introduction

+

The iDraw 2.0 A4 is an entry-level pen plotter designed for artists, designers, educators, and DIY creators. It transforms digital vector designs into precise physical drawings using real pens, markers, and brushes.

This guide walks you through setup, software installation, and your very first plot — step by step.

2. System Requirements

+
  • Windows / macOS / Linux computer
  • Inkscape 1.2.1 or newer
  • USB-A or USB-C port
  • Free desk space: 400 × 400 mm
  • SVG vector files

3. Box Contents

+
  • iDraw 2.0 A4 Plotter (fully assembled)
  • USB Cable
  • 12V Power Adapter
  • Pen Holder
  • Test Pen
  • Calibration Sheet
  • User Quick-Start Card
Always keep the original packaging for safe transport or warranty returns.

4. Technical Specifications

+
Working Area 210 × 297mm (A4)
Accuracy 0.01mm
Motors 3 precision stepper motors
Firmware GRBL compatible
Max Speed 300 mm/s
Pen Types Ballpoint, gel pen, fineliner
Power 12V / 1A adapter
Warranty 1 Year

5. Assembly

+
  1. Place the machine on a flat surface.
  2. Insert the pen into the pen holder and tighten gently.
  3. Connect USB cable to computer.
  4. Plug in the power adapter.
  5. Power on the device.
No mechanical assembly is required — iDraw 2.0 arrives fully pre-assembled.

6. Software Installation

+

Install Inkscape

  • Download and install Inkscape 1.2.1+

Install iDraw Extension

  1. Download the iDraw extension from UUNA TEK
  2. Copy to Inkscape extensions folder
  3. Restart Inkscape

Connect Device

  • Select COM/USB port
  • Click Connect

7. Your First Pen Plot

+
  1. Import or draw an SVG design.
  2. Scale artwork within A4 boundary.
  3. Click Plot.
  4. Choose speed and pressure.
  5. Start plotting.
Use a simple outline test shape for your first run.

8. Working With Layers

+
  • Each layer = one pen color or stroke type.
  • Plot layers individually.
  • Swap pens between layers.
  • Resume plotting after pen change.

9. Best Practice Tips

+
  • Use real vector paths — not images.
  • Keep pen pressure moderate.
  • Test new paper types beforehand.
  • Clean rails monthly.

10. Troubleshooting

+

No connection

  • Check USB port.
  • Select correct COM device.

Skipped lines

  • Lower speed.
  • Increase pen pressure.

Offset drawings

  • Re-run home calibration.

11. Resources

+
  • Official website: uunatek.com
  • Plotter portal: idrawpenplotter.com
  • Email support: support@uunatek.com
  • Free font tool & tutorials
Back to blog